Installation Instructions for Kahuna Grip Mats
Kahuna Grip™ Bathmat Installation
Supplies
Clean rag, cloth or paper towels, glass cleaner, rubbing alcohol, and masking tape.
Step 1
With a clean towel or rag. Clean the bathtub surface removing all soap scum, oil, dirt, wax, and grease. Make sure the bathtub surface area has no residue present. It is best to clean the surface one or more times, finishing with a final clean using rubbing alcohol. This will help ensure the best adhesion to the bathtub surface. Make sure the surface is completely dry before applying your Kahuna Grip™ bathtub mat.
Step 2
Unroll your Kahuna Grip™ bathtub mat, lay flat on tub surface and position in bathtub.
Step 3
Peel Kahuna Grip™ bathtub mat back from adhesive backing. Gently fold back your Kahuna Grip™ bathtub mat without creasing. Avoid touching the adhesive side of the mat as much as possible.
Step 5
Fold adhesive backing and tuck under your Kahuna Grip™ bathtub mat. Fold back adhesive backing as close to tape as possible without going past masking tape. Avoid touching the adhesive side of the mat as much as possible during installation.
Step 6
Carefully fold mat back over without letting it stick to surface. Working from the center of your Kahuna Grip™ bathtub mat outwards using your other hand. Rub your Kahuna Grip™ bathtub mat down to surface of tub.
Step 7
Remove masking tape from Kahuna Grip™ bathtub mat.
Step 8
Pull folded adhesive backing away from under your Kahuna Grip™ bathtub mat while rubbing mat to surface. Working from the center of your Kahuna Grip™ bathtub mat outward.
Step 9
Check that your entire Kahuna Grip™ bathtub mat is adhered to the surface. Hand wash and spot clean as needed. Enjoy your Kahuna Grip™ bathtub mat.