Posted on

Marine and Industrial Tread Traction by VersaTraction

VersaTraction Marine & Industrial Traction Treads
Marine and Industrial Tread Traction by VersaTraction

Available in a variety of sizes and endless traction or grip applications. VersaTraction Marine and Industrial Tread Traction can help you, your family or your employees be safe. Apply VersaTraction Marine and Industrial Treads Traction where ever you need more grip. VersaTraction traction treads work by keeping you from slipping where surfaces are wet or may become wet. The adhesive peel ‘n stick backing creates a strong bond and is easily removed when needed. VersaTraction Marine and Industrial Tread Traction is available in many different colors and a caution strip pattern to help draw attention. They can also be used to match a background surface color and blend in.

The diamond shaped non-slip traction surface can be applied in numerous areas that need more grip. VersaTraction works well on boat decks, docks, steps or stairs, ladders, ramps, decks, garage floors, hand tools, machinery, vehicles, and more. VersaTraction marine and industrial treads come in many different shapes and sizes to fit your needs. Whether you need rectangle shape treads, circle shape treads, square shape treads, or hexagon shape treads.

Standard Sizes Available Include: 3″ x 3″, 4″ x 4″, 5″ x 5″, 5¼″ x 5¼″, 1″ x 12″, 2″ x 9″, 6″ x 24″.


Metric Sizes Available Include: 7.62cm x 7.62cm, 10.16cm x 10.16cm, 12.7cm x 12.7cm, 13.335cm x 13.335cm, 2.54cm x 30.48cm, 5.08cm x 22.86cm, 10.16cm x 22.86cm, 15.24cm x 60.96cm.

Highly Durable Traction

VersaTraction has no artificial by-products or abrasive minerals that make up the anti-slip properties of the traction; it is simply made up of a highly durable polycarbonate / poly-elastomer blend (the same stuff bullet proof glass is made from). VersaTraction’s high resolution graphic-capable adhesive surface dramatically increases kinetic friction. Reducing slipping and loss of grip.

VersaTraction is a patented non-abrasive diamond embossed traction surface engineered into a film and laminated to a conformable, non-residual adhesive. VersaTraction is less than 1mm thick reducing drag when used in the water. It works well in both warm and cold water temperatures. VersaTraction is highly tolerant to UV exposure and can withstand water / heat temperatures up to 342°F (172°C) and down to -20°F (-29°C). VersaTraction has a burn rate of 342°F / 172°C / 445.372K to -20°F / -29°C / 244.261K.

Traction Tread Features


VersaTraction Patented Peel n’ Stick Anti-Slip Surface (PAT# 9,126,388 PAT# 9,296,152) • UV Resistant, Digitally Printed Graphics, Images, and / or Colors • Fully Customizable • Easy To Install • FAMILY SAFE • Conformable, Non-Residual Removable Adhesive (No Mess When Removed) • Odor Resistant, Mold & Mildew Resistant • Traction Doubles When Wet! • Works Well in Warm or Cold Water • Hand Wash and Spot Clean as Needed

Marine and Industrial Tread Traction by VersaTraction
Marine and Industrial Tread Traction by VersaTraction

Traction Doubles When Wet


Marine & Industrial traction treads anti-slip properties double when wet. VersaTraction was given an Advanced Technology Testing and Research / ATTAR “R11” rating (One of the Highest Oil and Wet Non-Slip Resistance Scores Given), an “F” rating (The Highest Rating Given) in the Wet Pendulum Test, a “B” (The Highest Rating Given) in the Wet Barefoot Test and has passed all ASTM International tests. VersaTraction is used by some of the world’s best water sport athletes, families, individuals, and businesses.

Give VersaTraction a try and see for yourself how well our products work. Contact us for information about Custom Graphics and Custom Cut Shapes for your traction needs.

Shop Tread Traction

Do You Have A Better VersaTraction Installation

Tag us in your posts showing creative ways you use VersaTraction, VersaTraction on Instagram.

VersaTraction & Kahuna Grip traction is born from surfing. Our traction and tread products are revolutionizing the non-skid industry with our high resolution graphic-capable, peel n’ stick applications that dramatically reduce slip and fall accidents. Made with patented hydro hold material, which contains millions of microscopic surface fractures. When these fractures get wet, they grip feet like little suction cups to prevent slipping. VersaTraction’s anti-slip properties double when wet, work in soapy/oily water and are family safe.

Marine and Industrial Tread Traction by VersaTraction
Posted on

VersaTraction SUP Wax Alternative

VersaTraction No Wax Surf Traction

VersaTraction stand up paddle board traction is the best no wax SUP grip available. The SUP Wax Alternative VersaTraction is made in the USA. Waxless all temperature SUP traction that works in warm or cold water. VersaTraction SUP traction comes in a paper thin variant that’s less than 1mm thick and also bonded to 1/16″ foam padding. Allowing for multiple uses across the deck of your SUP board. You can use it as a SUP traction pad or SUP grip tape. VersaTraction SUP traction can be easily trimmed to a custom fit for your SUP board. It gives your board the cleanest look possible, doesn’t melt in the sun or get sand stuck in it. Applied similar to gripping a skateboard deck with grip tape. Peel ‘n stick VersaTraction to your clean SUP board. Then go for a rip. VersaTraction is tough but, when you’re done with it, just peel it off. The non-residual adhesive leaves no mess behind on your SUP board. Shop VersaTraction SUP Traction.

Custom SUP Wax Alternative VersaTraction

VersaTraction SUP traction comes in pre-cut options and can also be custom ordered. No matter the length of your SUP board. We have five different pre-cut SUP traction pad kits to choose from. VersaTraction SUP traction is available in SUP 10′ Traction Kit, SUP 12′ Traction Kit, SUP Nose Traction Kit, SUP Middle Traction Kit, and SUP Tail Traction Kit. Contact us for custom stand up paddle board printed graphics, images or logos.

VersaTraction No Wax Surf Traction Kits
Paper Thin No Wax Surf Traction
VersaTraction Smooth in and out of the board bag.
Posted on

Kahuna Grip Mat Reviews

VersaTraction Kahuna Grip Peel-N-Stick Traction
Kahuna Grip Bath Mat Reviews

Here’s what our customers have to say about Kahuna Grip bath mats and shower mats. We’ve gathered just some of the great Kahuna Grip mat reviews and have listed them below. People who’ve used Kahuna Grip mats know how good it feels to feel safe in their bath tub or shower. Having the right bath tub mat or shower mat will help you avoid an unwanted slips. Go to, Shop Kahuna Grip to get your Kahuna Grip bath tub or shower mat now.

Kahuna Grip Bath Mat & Shower Mat Reviews

I’ve tried so many bathtub mats over the years and have been disappointed with all of them. The suction cups don’t stick, they don’t stay in place, they are difficult to clean, etc. etc. So, when I saw this peel and stick mat I decided to give it a try. As others have mentioned, it could be a little larger, but when strategically placed, it covers the area needed. The main concern I had was whether soap and shampoo would cause it to become slippery. Well, I am happy to report that they do not! I only regret not finding this mat sooner! It works as advertised, looks nice, is easy to clean, and I highly recommend it!

@JNell

Reviewed on Amazon.com

I was worried when I received the thin mat that looked like wallpaper but It is study , non-slip and attractive. I love it. I had heard it advertised but I was still skeptical.. It lived up to its reputation and it is an asset to the bathtub ambience.

@Beverlyjack

Reviewed on Amazon.com

Such a great mat. I put them in all bath tubs in the house, and the bathroom floors. Remarkable grip!

@Pete2002

Reviewed on QVC.com

I love this shower mat. I could never find one that would stay in place and this one does the trick. My tub floor is very slick and I was always worried about falling.

@Anonymous

Reviewed on wayfair.com

This shower mat does its job. Its thin you cant even feel its there and it does not peel off. Love this!

@Ma Cristina

Reviewed on wayfair.com